Any
Questions ?
Call
Us
(508) 881-9959
M-F 10am - 6pm Eastern
| Technical Bulletin 1992 | |||
|
TBC |
DESCRIPTION | PRODUCT |
MODULE |
| Remote ACON cable |
none |
||
| Audio crosstalk on S-VHS decoder |
800930 S-VHS |
||
| No H lock with S-VHS and 3,4,5 wire |
Interface |
||
| Dark vertical bar on left edge |
Interface |
||
| Adjustable colour correction |
Waveform |
||
| More stable MOVE circuit |
Horizontal Defl. |
||
| ACON aborts after blue sensing |
ACON control |
||
| ACON "Can't find center" |
ACON control |
||
| Vertical auto-lock roll |
V. Defl. & H. Reg |
||
| Video jitter at top of picture |
Horizontal Defl. |
||
| Poor interlace with S-VHS Decoder |
Horizontal Defl. |
||
| Poorly mis-converge with ACON |
Video Control |
||
| Improve smoother operation HMOVE |
Horizontal Defl. |
||
| Flash of image as yoke wires move |
Yoke wires |
||
| IR Noise |
Sensor / Keypad |
||
| Throw Distance Calculation |
none |
||
| CRT Comparison 7" versus 8" |
none |
||
| New (Spellman)High Voltage Supply |
HVPS |
||
| V3.1 Software Short List |
none |
||
| Dip Switch settings on Convergence |
Convergence |
||
| Modification for 2 Composite Input |
SVHS Decoder |
||
| Using 2 or more SVHS Decoder 800930 |
SVHS Decoder |
||
| Technical Bulletin 1993 | |||
| TBC | DESCRIPTION | PRODUCT |
MODULE |
| Bottom Blanking erratic (V3.1) |
ACON control |
||
| ANSI (lumen) method of measurement |
none |
||
| Rolling horizontal bar (MAC II) |
none |
||
| ACON performance |
ACON |
||
| New HVPS bracket for ECP Graphics |
HVPS |
||
| Mounting info for Marquee 8000 9000 |
none |
||
| Technical Bulletin 1994 | |||
| TBC | DESCRIPTION | PRODUCT |
MODULE |
| TBC94-1 | Marquee 9000 Throw Distance and Lens Information | Marquee 9000 |
Delta HD-10L,
HD-10GT17, HD-10GT26 Lenses |
| TBC94-2 | Marquee 9000 with Thomson CRT Replacement | Marquee 9000 |
CRTs |
| TBC94-3 | Increased Marquee Video Neck Board (VNB) Reliability | Marquee
8000 |
VNB |
| TBC94-4 | Marquee Power-up Problems | Marquee
8000 |
LVPS |
| TBC94-5 | Remove Capacitor on VNB with HFA1100 | Marquee
8000 |
VNB |
| TBC94-6 | Marquee Focus Module Reliability Improvement | Marquee
8000 |
FCM |
| TBC94-7 | Marquee Switcher/Projector Communications | Marquee
8000 |
Marquee Switcher |
| TBC94-8 | Bright Vertical Line on Right Edge of Image | Marquee
8000 |
VIM |
| TBC94-9 | Marquee Software
Discussion / Initialization / Erratic Keypad Operation |
Marquee
8000 |
CLM |
| TBC94-10 | Proper CRT
Aquadag/VNB Connection is Necessary for Reliable VNB Operation |
Marquee
8000 |
VNB |
| TBC94-11 | The Projected
Image May Disappear on Marquee Projectors Set to High Contrast Levels Depending on the Image Content |
Marquee
8000 |
VIM |
| TBC94-12 | Modifications for Using ACON with Older Marquee Projectors | Marquee
8000 |
CLM |
| TBC94-13 | Remove Q3 on Some VNB for Reliable Operation | Marquee 8000 |
VNB |
| TBC94-14 | Backlit Wired Keypads May Not Operate Marquee Projectors | Marquee
8000 |
CLM, Backlit Wired Keypad |
| TBC94-15 | “Jailbar” Shading Pattern Observed In Projected Images | Marquee
8000 |
CVA, CVM |
| Technical Bulletin 1995 | |||
| TBC | DESCRIPTION | PRODUCT |
MODULE |
| TB95-01 | Both The Left And Right Edge Of The Image Cannot Be Displayed At Once | Marquee
8000 |
HDM, CLM, DPB |
| TB95-02 | Scan Failure Occurs
Or Random Characters Are Displayed When Switching The Source Causes The Horizontal Scan Frequency To Cross 27kHz. |
ECP
2500 |
Horizontal Deflection
& Sync Processing PCB |
| TB95-03 | Projector Functionality
“Locks Up” After Powering Up The Projector |
Marquee
8000 |
CLM |
| TB95-04 | Revised Throw Distance Specifications | Marquee
8000 |
HDM |
| TB95-05 | Throw Distance Formulas Revised To Reflect Marquee 8000/9000 Formulas | Marquee
8000 |
|
| TB95-06 | ACON and Decoder Module Keying Modification | Marquee
8110 |
Multistandard Decoder
(MSD), ACON Control Module (ACM) |
| TB95-07 | Vertical Deflection Module Modifications for Improved Performance | Marquee
8000 |
VDM |
| TB95-08 | Dealer Service Instructions | ECP
2500 |
|
| TB95-09 | RGB Sync 2 Input Modifications for Vertical Sync Crosstalk | ECP
2500 |
RGB 2 Input Module |
| TB95-10 | Horizontal Deflection Module Modifications for Folded Image | Marquee
8000 |
HDM |
| TB95-11 | Video Input Module (VIM) Modifications For Improved Performance |
Marquee 8000Marquee 9000Marquee 8110Marquee 8500 Marq. 8500LC Marq. 9500LC | VIM |
| Marquee Software DPB D4.80 Release Notes |
Marquee 8000Marquee 9000 | DPB |
|
| Marquee Software IOP I2.4 Release Notes |
Marquee 8110Marquee 8500 Marq. 8500LC Marq. 9500LC | CLM |
|
| Marquee Software IOP I1.7 Release Notes |
Marquee 8000Marquee 9000 | CLM |
|
| ShowStar Throw Distance and Vertical Position Formulas |
ShowStar | ||
| Technical Bulletin 1996 | |||
| TBC | DESCRIPTION | PRODUCT |
MODULE |
| TB96-01 | Input Interfacing | ShowStar |
|
| TB96-02 | IR Heat Sink Fan | ShowStar |
IR Heat Sink Fan |
| TB96-03 | ShowStar Throw Distance and Vertical Position Formulas | ShowStar |
|
| TB96-04 | Marquee Software Main 68k V3.3 Release Notes | Marquee
(all) |
CLM |
| TB96-05 | Using the RS-232 to Control Marquee projectors | Marquee
(all) |
|
| TB96-06 | Upgrade to U41 Programmed IC on VIM Restores S-Video Functionality and Allows Sync-Tip Clamping | Marquee 8110+, 8500,8500LC, 9500LC |
VIM |
| TB96-07 | ShowStar Shutdown | ShowStar |
n/a |
| TB96-08 | ShowStar Ignitor | ShowStar |
ignitor ciruit |
| 1997 Technical Bulletin Summary | |||
| Bulletin | Description | PRODUCT |
MODULE |
| TB97-01 | RS-232 Enhancements, Phase 1 | Marquee (4.x software) |
|
| TB97-02 | VistaPro Operating Tips & Reminders | VistaPro,
VistaPro Plus |
|
| TB97-03 | VistaPro Video Decoder Information | VistaPro,
VistaPro Plus |
VDM #38-804001-97 |
| TB97-04 | Marquee “Snap” | Marquee
(pre-July 97) |
CLM |
| TB97-05 | VistaPro Lamp Compartment Mod. | VistaPro,
VistaPro Plus |
LPSM |
| 1998 Technical Bulletin Summary | |||
| Bulletin | Description | PRODUCT |
MODULE |
| TB98-02.PDF | Modification to improve Marquee Focus | 8110,
8500, 9500 |
50-002034-02P
from 07-01-1997 to 04-20-98 |
| TB98-03.PDF | Additonal RS-232 Codes | Marquee
Series |
4.1 Software and higher |
| TB98-06.PDF | Testing and replacement LVPS | 8110,
8500, 9500 |
10-002299-0P from 01-01-96 to 04-31-98 |
| TB98-14.PDF | Acon Trobuleshooting | Marquee
Series |
|
| 1999 Technical Bulletin Summary | PRODUCT |
MODULE | |
| Bulletin | Description | PRODUCT |
MODULE |
| TB99-12.PDF | Heater Voltage Test | Marquee | 10-000229-0P |
| TB99-16.PDF | ECP Manual Corection | ECP 3500 4500 | |